.3M 4200 FAST CURE MARINE SEALANT 3oz. TUBE.

.3M 5200 FAST CURE MARINE SEALANT 3oz. TUBE.

Details 

.Boom Tent Cover Clip.

Details 

With Stainless Steel Construction - this piece is used on Daysailer & Javelin!

.Daysailer Boom Tent Cover Sunbrella.

Details 

.Daysailer Sail Cover.

Details 

Made with Sunbrella, comes standard w/ Pacific Blue! Manufactured per order, additional colors available! Comes with large, durable zipper and stainless twist locks. Visit our general canvas catagory for even more Sunbrella options!!!

1NE Rope Sta-Set 3/16" White Price by the foot.

2NE Rope Sta-Set 1/4".

Details 

New England Sta-Set Line By The Foot

3NE Rope Sta-Set 5/16" Price by the Foot.

Details 

New England Sta-Set Line By The Foot

4NE Rope Sta-Set 3/8" Price by the Foot.

Details 

New England Sta-Set Line By The Foot

6 Rub Rail Flexible U-Channel Small.

Details 

This is flexible pvc rub rail used with rigid underrail (50' section) COLOR WHITE ONLY

6 Rub Rail Rigid Under Rail for U-Channel Small - 7’Section.

Details 

This Rub Rail is a ridgid pvc, used on most of the older O'Day sailboats (7’Section)

Boom Bail Small.

Details 

Fits up to 2" Wide Boom

Boom Crutch Scissors.

Details 

These are made from solid ash and are finished with poly.

Boom Vang Kit 3:1 Complete.

Details 

For use on boats 12' to 22'

BOW EYE, 3/8" X 1-1/2" X 4" STAINLESS STEEL U-BOLT / PULL STRENGTH 3200#.

CDI FF1 Flexible Furler.

Details 

Centerboard Handle Assy. Complete.

Details 

Primarily used on Daysailer I, O'day Osprey & Older Widgeons (1964-1970)

Centerboard Handle Only Cast Bronze.

Details 

Primarily used on Daysailer I, O'day Osprey & Older Widgeons (1964-1970)

Centerboard Handle Pressure Plate.

Details 

Cast Bronze Pressure Plate, Mounting Bolts Included! (3) Primarily used on Daysailer I, O'day Osprey & Older Widgeons (1964-1970)

Centerboard Locking Pawl for Handle.

Details 

Locking Pawl only - Cast Bronze (Needs to be fitted to handle and then drilled) Primarily used on Daysailer I, O'day Osprey & Older Widgeons (1964-1970)

Centerboard Mounting Plate for Handle.

Details 

This plate gets fiberglassed to the centerboard trunk. Primarily used on Daysailer I, & Widgeons!

Centerboard Pivot Bolt w/Locking Nut.

Details 

Used on Daysailer, Javelin & Widgeon.

Centerboard Plates (pr).

Details 

These plates are used on many O'days - purpose is to hold CB wedges in the CB box.

Centerboard Rubber Washer 3" O.D..

Details 

For centerboard lever - Size: 3"OD x 1" Center Hole: 1/4" Thick Neoprene Rubber. This piece is primarily used on Daysailer I & Older Widgeons!

Centerboard Rubber Washers (pr).

Details 

Used on D/S ll ,Javelin,& Widgeon (2 of these are needed per boat) - These come paired! Size; 1-1/2" OD x 1/2" hole x 1/4" Thick

Chainplate Backup.

Details 

Used With Sidestay Chainplate-- Both Holes are 1/4"

Chainplate For Sidestay SS (each).

Details 

Used on O'day D/S,Javelin,& Widgeon--All Holes are 1/4"

Cheek Block SINGLE W/ 1-1/16" Sheave.

Details 

Stainless Steel Construction with Delrin 1 1/16" Sheave. Max. Line Size 5/16"

Clam Cleat Jr..

Details 

Cleat 3-1/4" 2 Hole Black Alum..

Details 

Cleat 4" 2 Hole Black Alum..

Details 

Black Alum. 2 Holes

Cleat 5" 2 Hole Black Alum..

Details 

Black Alum. 2 Holes

Clevis Pin 1/4" x 1/2" With Circular Ring.

Details 

These Pins Will Fit 1/4 Turnbuckles

Clevis Pin 3/16"Dia.x 13/32"& Circular Pin.

Details 

These pins are used on the Daysailer, Javelin & Widgeon! These Pins will not work on Upgraded Rigging With Full Size Turnbuckles. See 1/4" Clevis Pins.

D/S & Javelin Bolt & Nut.

Details 

Stainless Steel Bolt and Wing Nut (Includes 2 SS Washers) - Used on Daysailer & Javelin

D/S & Widgeon C/B Bushing-Delrin.

This is the bushing in the centerboard for the pivot bolt.

D/S 3 MAIN SAIL & R/F JIB SAIL.

DAYSAILER 3 MAIN SAIL (WHITE) WITH I REEF,INSIGNIAS,SAIL BAG & BATTENS. R/F JIB SAIL (WHITE) W/WIRE LUFF & SACRIFICIAL SUNCOVER --NEIL PRYDE SAILS

D/S R/F JIB SAIL W/LUFF TAPE FOR CDI FF1 FURLER.

THIS ROLLER FURLER JIB SAIL HAS A WHITE SACRIFICIAL UV COVER. 4 WEEK LED-TIME IS POSSIBLE

Davis Tiller-Tamer #2205.

Details 

This unique piece installs easily to inboard & outboard rudder tillers and gives smooth and adjustable tension from fully locked to fully loose. Be hands-free no matter the weather conditions.

Daysailer & Javelin Boom End Cap Casting.

Details 

will fit booms that measure 1.75" x 2.75"

Daysailer & Javelin Mainsheet Boom End Sheeting.

Boom End Sheeting is 40 ft of 5/16" Line With Eye Splice

Daysailer ,Javelin & Widgeon Headstay Stemhead.

Details 

Daysailer 1 & II & Javelin Rudder Pivot Bolt & Nut.

Stainless Steel Bolt & Locking Nut

Daysailer Boom Complete w/Hardware.

Details 

This Item Can't Be Shipped By UPS Please Call For Freight Quote This boom does include the complete gooseneck

Daysailer Boom Downhaul Line.

Daysailer Boom Extrusion Only.

Details 

This Item Can't be Shipped by UPS-Please Call for Freight Quote

Daysailer I & II & Javelin Rudder & Tiller Complete.

Details 

Daysailer I & II Only 1959-1982-1/2

Daysailer I & II & Javelin Rudder Blade Only.

Details 

Fiberglass construction, white gealcoat finish! Used on D/S II 1971-1982-1/2

Daysailer I & II & Javelin Rudder Head Complete With Pintles.

Fiberglass Construction

Daysailer I & II & Javelin Rudder Head Only.

Details 

Fiberglass construction, white gelcoat. We also carry white rudder blade.

Daysailer I & II ,Javelin Tiller Only 48"Long.

Details 

Made from Solid Ash and Poly-Finish (48" Long) Daysailer I & II 1959-1982 Javelin 1962-1982

Daysailer I & II Forestay Only.

Details 

We have upgraded to 1/8" wire 1x19 - 316SS Used on D/S I & II ONLY!

Daysailer I & II Forestay Uprgrade w/Fullsize TurnBuckle.

Details 

We have upgraded to 1/8" wire 1x19 - 316SS This is for D/S I & II ONLY!

Daysailer I & II Forestay w/ New Quick Release Lever.

Details 

Daysailer I & II Standing Rigging (3 Stays).

Details 

We have upgraded to 1/8" wire 1x19 - 316SS This is used on D/S l & ll ONLY!

Daysailer I & II Standing Rigging Uprgrade w/Fullsize TurnBuckles - Complete Set.

Details 

Used on D/S I & II ONLY!! We have upgraded to 1/8" wire 1x19 - 316SS - Complete 3 pc. set!

Daysailer I Centerboard Only.

Details 

Daysailer I,II & III Side Stay Only.

Details 

We have upgraded to 1/8" wire 1x19 - 316SS D/S I,II,& III

Daysailer I,II & III Side Stay Upgrade w/Turnbuckle - (PR).

Details 

We have upgraded to 1/8" wire 1x19 - 316SS - Comes as a set!

Daysailer II & III ,Javelin & O’day 15 Rudder & Tiller Complete.

Details 

Aluminum Rudder Head Complete with Pintles, Fiberglass Kick-Up Blade and Solid-Ash Tiller. Used also on O'day 15 1981 & up / DSII 1983 & up, Javelin 1984 & up.

Daysailer II & III C/B Cable Assy..

Details 

Daysailer II & III C/B Pivot Pin.

Machined from Delrin Also used on D/S II 1981 & up

Daysailer II & III C/B Tang SS.

Details 

Daysailer II & III Centerboard Only.

Details 

Comes with no hardware or pivot hole.

Daysailer II & III Rudder Blade Only.

Fiberglass Construction Also used on D/S II 1983 & up Also used on Javelin 1983 & up O’day 15 1981 & up

Daysailer II & III,Javelin & O’day 15 Complete.

Aluminum Rudderhead - Complete with Pintless Also used on D/S II 1983 & Up

Daysailer II & III,Javelin & O’day 15 Tiller Only 43".

Made from Solid-Ash with Poly-Finish.

Daysailer III Forestay Uprgrade w/Fullsize TurnBuckle.

Details 

Daysailer III Forestay Only.

Details 

We have upgraded to 1/8" wire 1x19 - 316SS Used on D/S III ONLY!

Daysailer III Standing Rigging Uprgrade w/Fullsize TurnBuckles - Complete Set.

Details 

Used on D/S 3 ONLY!! We have upgraded to 1/8" wire 1x19 - 316SS - Complete 3 pc. set!

Daysailer Jib Car Pair (Adjustable).

Details 

Swiveling Cars come complete with 12" jib tracks. Used on Javelin & Daysailer

Daysailer Jib Halyard Complete w/Shackle.

Details 

We use New England Sta-Set 1/4 Blue Flex and splice on a 316 SS halyard shackle. Other colors are avalibile.

Daysailer Jib Sail Only Neil Pryde.

Daysailer Jib Sheets.

Daysailer Jib Tracks 12".

Details 

Daysailer Main Halyard Complete w/Shackle.

Details 

We use New England Sta-Set 1/4" Color Red Flex Sliced on to 316 SS Halyard Shackle.. Other colors are avalibile.

Daysailer Main Sail Only with Battens Neil Pryde.

Mainsail w/ Insignia and 1 Reef and Battens

Daysailer Mainsail Outhaul Line.

Daysailer Mast Complete w/all Hrdw less Rigging.

Details 

Daysailer Mast Complete w/all Hrdw less Rigging. This product is too large to ship UPS. Please call for freight pricing.Dimensions 2.12in. wide 2.84in Deep (Lengths are 24' 1" on D/S II and 24'7" on D/S I)

Daysailer Mast Complete with Hrdw and Rigging.

Details 

Daysailer Mast Complete w/ Hardware and Rigging. This product is too large to ship UPS. Dimensions 2.12in. wide 2.84in Deep (Lengths are 24' 1" on D/S II and 24'7" on D/S I)Please call for freight pricing to your area.

Daysailer Mast Extrusion Only.

Details 

Daysailer Mast Extrusion Only With Sail Feed.Dimensions 2.12in. wide 2.84in deep. (D/S I Extrusion 24'7" & D/S II is 24'1") This product is too large to ship UPS. Please call for freight pricing.

Daysailer Mast Step Casting.

Details 

Daysailer Mast Tabernacle D/S II & III.

This was use on the newer D/S 2 1982-1986 and D/S 3 1987-1989 Deck Stepped Mast ( No Hole Thru The Deck)

Daysailer Mast Tabernacle Piggyback D/S I & II.

Details 

This product is not recommended if your Daysailer is on a mooring. Call Rudy@ D & R to Discuss.

Daysailer Masthead Complete with sheave.

Details 

Daysailer Mid-Boom Mainsheet with Boom Block.

Daysailer Mid-Boom Mainsheet Only (Opt.4:1).

This mainsheet is to be used with the 4:1 system 3/8" x 32' Std color red flex

Daysailer Mid-Boom Mainsheet Only(Std.3:1).

This is for mid boom sheeting. Line is 3/8" x 25 ft. with eye splice. STD color red flex

Daysailer Sail Battens (Set of 4).

2 Battens @ 40" 2 Battens @ 30" Fiberglass diamond shape

Daysailer Sails Main & Jib with Battens & Bag N/P.

Mainsail w/Insignias & 1 Reef & window in the Jibsail

Daysailer Sidestay Mast Tang.

Details 

Daysailer Spreader Bar Heavy Duty (Ea).

Details 

5/8" X 21-1/4" New Extra Heavy Duty Alum. 5/8"Round Tube to 1/2" Square End Used on D/S I,II & III The price reflects 1 Each Not a Pair

Daysailer Spreader Bar Alum. 1/2" X 21-1/4"(Ea).

Details 

New For 2018 Heavy Wall Spreaders 1/2"OD x 21-1/4" Long Used on D/S I,II,& III Twice the thickness as the original! The price reflects 1 each not a pair!

Daysailer Teak Cuddy Doors.

Details 

FOR DAYSAILER 2 & 3 only for year 1974 and up These are with 1/2"Teak Veneer Plywood (Marine Grade) PLEASE ALLOW 2-3 WEEKS FOR DELIVERY

Daysailer Topping Lift Kit.

KIT CONTAINS 1 DR908 Cheek Block w/Fasteners 1 3-1/4" CLEAT W/FASTENERS 50 FT 1/4" STA-SET WITH SHACKLE SPLICED ON

Daysailer U Channel for Cuddy Door opening.

Details 

Downhaul Cleat 3-1/4".

Details 

Drain Plug to Drain Inner Hull (2 pc) FITS 1" HOLE.

Details 

2 pc. black plastic-plug with housing size 1"- This plug is to drain the water between the hull and the deck. (Primarily used on Javelin, Widgeon & Daysailer)

Drain Plug to Drain Inside of Cockpit.

Details 

Fits into 1" brass tubing that goes thru the transom!

Eye Strap.

Details 

Garhauer Fiddle Block w/ Adjustable Shackle 1.

Details 

All Stainless Steel Construction with 3/16"shackle & 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Fiddle Block w/ Cam Cleat & Swivel Shackle.

Details 

All Stainless Steel Construction with 3/16"shackle & 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Fiddle Block w/ Snap Shackle 1.

Details 

All Stainless Steel Construction with 3/16"shackle & 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Fiddle Block w/Cam Cleat & Snap Shackle & Becket.

Details 

All Stainless Steel Construction with 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Fiddle Block w/Cam Cleat & Swivel Shackle & Becket.

Details 

All Stainless Steel Construction with 3/16"shackle & 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Mainsheet Standup Swivel Block w/ Cam Cleat.

Details 

All Stainless Steel Construction with 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Single Block w/ Snap Shackle & Becket.

Details 

All Stainless Steel Construction with 3/16"shackle & 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Single Block w/ Swivel Shackle.

Details 

All Stainless Steel Construction with 3/16"shackle & 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Single Block w/Swivel Shackle & Becket.

Details 

All Stainless Steel Construction with 3/16"shackle & 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Garhauer Single Stand-Up Block, BB.

Details 

All Stainless Steel Construction with 1-3/4" Sheave.Safe working load 1150 lbs.All Ball Bearing Sheaves.

Gooseneck Casting only w/ Pin.

Details 

Fits boom that is 1.75" x 2.75"

Gooseneck Complete.

Details 

Fits Boom that is 1.75" x 2.75"

Gooseneck Slide Only.

Details 

Gooseneck Tack Bracket w/ Reef Hook.

Details 

Used primarily on O'day: Javelin, DS, Mariner, R19, O'19, O'192, O'20 & O'22 Includes the quick release pin

Gooseneck Tack Pin W/Roll Pin.

Gooseneck Universal Connector 3/4" x 3/4".

Gudgeon For 3/8" Pintle Stainless Steel.

Details 

4 Hole Gudgeon 5/8" x 4-1/8" Use 10-24 Machine Screws & Lock Nuts for mounting to transom. Used on O'day Widgeon,Javelin & Daysailer.

Headstay / Sidestay Mast Tang.

Details 

Used primarily for Daysailer & Widgeon! This tang comes complete with 3 holes to attach to mast.

Ice Box Cover Only / Fiberglass / Off-White 14/34" x 11"- USED ON DS II.

Details 

Please allow 2 weeks for delivery

Inspection Port 4" Screw Type.

Details 

Color:Off White Size:4-1/4" cut-out Overall Size 5-7/8"OD

Jib Block on Slide Car 5/8".

These Jib Blocks will fit existing track on O'day D/S & Javelin. Sheave Size 1-1/16 OD For 5/16" line Max. Call Rudy for further Questions.508-644-3001

LOWER TURNBUCKLE T-TOGGLE LH THREAD 1/4-28 COMPLETE W/ CLEVIS PIN.

This is most commonly used on open body turnbuckles.

Mainsheet Swivel Jammer.

Details 

This mounts on the centerboard trunk-aft.

Mast Eye.

Details 

use (4) SSP2 pop rivets

Masthead Sheave Only.

Details 

Delrin: 1 1/16" Diameter, 7/16" Thick! 1/4 hole

Ronstan Cam Cleat (md).

Details 

These are Carbon-Fiber Cam-Cleats, sold individually. Known for high strength ability and superior hold! Fastener hole centres: 1 1/2" Rope Diameter: 1/8"-1/2"

Ronstan Front-Mount Fairlead (md).

Details 

Fits with Ronstan Cam Cleat RF5010 (DR5010)!

Ronstan RF616 Screw Pin D Shackle 3/16".

Details 

Stainless Steel Ronstan Standard Dee Screw Pin Shackle -Coined Pin Head ~ 3/16" ~ Part# RF616 Working Load Limit 880 lbs. Width between eyes 7/16"

Ronstan, Fairlead w/ SS Insert.

Details 

Ronstan Dead Eye! Includes Stainless Steel Insert, 9/16 Hole Clearance!

Rudder Pintle (Upper) with Safety Pin.

Details 

Pintle & pin are stainless steel. For 1-1/4" Rudders with 3/8"dia pin.Used on O'day Widgeon,Javelin & Daysailer1&2

Rudder Pintle 1-1/2"(Lower).

Details 

Heavy Duty Rudder Pintle Stainless Steel 1-1/2” Wide with 3/8" pin

Safety Pin for Rudder.

Details 

Made of Stainless Steel.

Sail Track Stop 1/2' Round.

Details 

Size: 1/2" x .875"

Self Bailer D/S & Javelin.

Details 

Single Bullet Block.

Details 

Sheave Dia. 7/8" Max. 5/16"Line

Single Front/Side Shackle Block w/ Becket.

Details 

Stainless Steel Construction with Delrin 1 1/16" Sheave

Single Swivel Block 1-1/16"Sheave.

Details 

Stainless Steel Construction with Delrin 1 1/16" Sheave. Max.Line: 5/16"

Single Swivel Block w/ Becket.

Details 

Stainless Steel Construction with Delrin 1 1/16" Sheave Max.Line: 5/16"

Spreader Boots, Small (PR).

Details 

HURRY! OUR RUBBER SPREADER BOOTS ARE FINALLY BACK! Fits quickly and easily over the stay and spreader end. Sold by the pair! Fits 1/2" - 1" round spreaders! Color: White

Spreader Bracket - Stainless Steel.

Details 

Uses 3 SS rivets or SS self-tapping screws for mounting..

Tabernacle Hinge Small.

Details 

Top Plate is 4"x 2-5/8" Bottom Plate Bolts to Deck and Measures 4" x 3-7/8"

Tabernacle Pin Sm.1/4" x 3-1/2”.

Details 

Fits Small Tabernacles

Tack Shackle for Jib Sail.

This Shackle will connect your jib sail to the stemhead plate on the fore deck.The shackle is 316 SS With a captive 3/16" Pin. Any ?? Call Rudy @508-644-3001

Windex 10 Sport.

Details 

Designed for small sailboats. Features 10" vane and adjustable tacking arm. Incudes glass-reinforced polycarbonate J-base for side,top,or front of mast mounting. - Stands 9.25" Tall