Low Lead Car For 1-1/4" Track.

Length 6-3/8" Weight 32oz. Safe Working Load 3500 Lbs.

Mainsheet Swivel Jammer.

Details 

This mounts on the centerboard trunk-aft.

Mariner Hinged Mast Step Complete.

Details 

New Item #DR2140H For Mariner Owners Who Want a Hinged Mast Step. Mast Step Casting 2.25"x3.75" Mounted on a Large Hinge 4"W x 6-1/2"L Botton Plate is Mounted with 4 5/16" Bolts (Not Included) Also Bottom of Mast Must be cut.Call Rudy to Discuss@508-644-3001

Mast Eye.

Details 

use (4) SSP2 pop rivets

Mast Step Casting Only 2.75"Wx 4.5"L.

Details 

Cast Alum. Mast Foot Fits Mast Section 2.75 x 4.5 in.

Mast Step Casting Wid/Jav.

Details 

Used on O'day Javelin & Widgeon

Mast Step Complete w/Hinge 2.75 W X 4.5 L.

Details 

Mast Tabernacle Piggy Back Javelin/Widgeon.

Details 

Used on O'DAY Javelin & Widgeon This product is not recommended if your sailboat is on a mooring. Call Rudy @ D & R to discuss.

Mast Tang - 6".

Details 

Used on older O'day models: Mariners & Rhodes 19

Mast Tang, Heavy Duty.

Details 

1/8" x 1" x 4", 5/16" Clevis hole. 3/8" bolt hole

Masthead Complete w/ Sheaves Wid/Jav.

Details 

Masthead Complete With Sheaves O’23,25 & O’26.

Details 

Masthead Complete w/ Sheaves & Toggles!

Masthead Rig with 4 Aluminum Sheaves.

Details 

Dimensions: 2.75 in. x 4.50 in.

Masthead Sheave Aluminum 1-3/4" X 1/2"X 1/4".

Details 

Aluminum, 1-3/4" Diameter, 1/2" Thick, Stainless Steel Bushing for 1/4" Pin or Bolt. Sheave pivot hole without bushing is for 3/8"pin or bolt.

Masthead Sheave Only.

Details 

Delrin: 1 1/16" Diameter, 7/16" Thick! 1/4 hole

Masthead with 2 Aluminum Sheaves.

Details 

Fits O’day Mariner O’day 20/22 Fractional Rig

O’day 23,25,26,Mariner & R-19 Lower Pintle for Rudder.

Details 

O’day 23,25,26,Mariner & R-19 Upper Pintlle for Rudder.

Details 

O'192/222 Rudder Head Complete w/ Pintles.

Details 

This Rudder Head is Used on the O'day 192 & 222

O'Day 19,192 & 222 Lower Pintle for Rudder Head.

Details 

O'Day 19,192 & 222 Upper Pintle for Rudder Head.

Details 

O'day 192 & 222 Tiller Complete w/Clam Cleat.

O'day 192 Hinged Mast Step Complete.

For Dwyer / DAMCO mast only

O'day 192 Mast Step Casting Only 2 1/2 x 3 3/4.

O'day 192 Spreaders Port or Strbd.(ea) Dwyer Mast Only 24" Long.

24" long

O'day 20 & 22 Lower Pintle for Rudder.

O'day 20 & 22 Spreader Bar 26" X 5/8".

Details 

Size 26" long 5/8" Round Tube--Square End Towards Mast

O'day 20 & 22 Upper Pintle for Rudder.

O'day 20 Boom End Casting--Outhaul.

O'day 20/22 Spreader Bracket 7/8".

For 7/8" spreader bar

O'day 22 Boom Outhaul Cap.

O'day 22 Rudder & Tiller Complete.

Details 

This Rudder will fit boats built from 1971-1984

O'day 22 Rudder Only.

Details 

This Rudder will fit boats built from 1971-1984

O'day 22,Mariner & R-19 Gudgeon (Ea).

O'day 222 Gooseneck Complete.

This will only fit Damco Mast This will not fit Z-Spar Mast

O'day 222 Hinged Mast Step Complete.

Details 

This will only fit Damco Mast This will not fit Z-Spar Mast

O'day 222 Mast Step Casting Only2-3/4 X 4.5”.

Details 

O'day 222 Spreaders Port & Strbd..

This will only fit Damco Mast This will not fit Z-Spar Mast

O'day 222 Swim Ladder-Transom.

Details 

Originally designed for O'222 & O'240, however also can be used on many small boats from O'19-O'24. Overall length: 38", Width: 10 3/4" ... 5 step! Please allow 4 weeks for delv.

O'day 23 & 25 Spreaders (Pr).

These spreader bars are 33" long x 1-1/8" OD They are clear anodized (Not Painted or Gold)

O'day 23 Gooseneck Casting Only w/Tack Pin.

Details 

O'day 23 Gooseneck Complete.

Details 

This fits booms 2-1/4" x 3-3/4"

O'day 23 Mast Step Casting 1977 - 1981 tear drop shapped mast.

if you are interested in this item please call Rudy with your e-mail address to send picture!

O'day 23 Mast Step Casting Only 1982-84.

Details 

O'day 23 Mast Step w/Hinge Plate Complete 1982-84 Only.

Details 

O'day 23/25 Gooseneck Tack Pin Only.

O'day 23/25/26 Transom Swim Ladder SS.

Details 

All Welded Stainless Steel As Per Oringinal Print Please Allow 2-3 weeks for Delivery

O'DAY 240/ 302/322 OPENING PORT WINDOW 4 X 14 BLACK.

THIS OPENING PORT WINDOW COMES WITH TRIM RING, SCREEN, GASKET AND BRONZE LENZ / USED ON O'DAY 302 & 322 (SEALANT RECOMMENDED : DOW CORNING 795 BLACK)

O'day 25/26 Boom Outhaul Cap.

Details 

O'day 25/26 Gooseneck Complete O25.

Details 

O'day 25/26 Gooseneck, Casting Only w/ Tack Pin O'da.

Details 

O'day 25/26 Mast Step Casting Only.

Details 

O'day 25/26 Mast Step With Hinge Complete.

Details 

O'day 27 Rudder Complete With Stainless Steel Shaft.

Details 

Old Style - Complete!

O'day 27 Rudder w/Stainless Steel Shaft.

Details 

O'day Gudgeon (Ea).

Details 

Used on many O’day Models

O'day Mariner Spreader Bar.

Details 

New extra Heavy Duty for 2022**

O'day Mariner & R-19 Rudder & Tiller Complete Keel.

O'day Mariner & R-19 Rudder & Tiller Kick-Up Complete.

Details 

O'day Mariner & R-19 Rudder Blade Only K/U Style.

O'day Mariner Boom Outhaul Cap w/ tang.

O'day Mariner Headstay Tang 6 Hole.

6 Mounting Holes

O'day Mariner Rudder Blade Only Keel Style.

O'day Mariner Sidestay Mast Tang Upper.

O'day Window Main Cabin Smoked Plexi (Ea).

Details 

O'day Main Cabin Window Special Tint Used on O'day 28 1981-86 O'day 30 1981-84. O'day 31 1985-87 O'day 34 & O'day 35(All of Them)

Pearson 26 Cast Bronze Tiller Bracket.

Details 

Pearson 26 Rudder Collar SS.

Details 

Pearson 26 Rudder Complete w/ SS Shaft.

Details 

This rudder is manufactured from the ORIGINAL Pearson mold!!! - Fiberglass construction, comes complete w/ rudder head and 3 pc.set of rudder bushings.

Pearson 26 Rudder Head.

Details 

Original aluminum casting, connects to the top of the Rudder Shaft.

Pearson 26/30 Rudder Bushings - 3 pc set.

Details 

For your convenience, now available in 2 sizes! This 3 pc set is machined from black Delrin. (2 Bushings & 1 Bearing Washer)

Pearson 26/3O Rudder Bushing Ring Only.

Details 

1/4" Spacer Washer

Pearson 28 Mast Step Casting.

Details 

Pearson 28 Mast Step Casting Old Style.

Details 

Used on Pearson 28 - Aluminum

Pearson 28-2,P31-2 & P-33 Rudder Bushings (2pc Set).

Details 

Used on Pearsons 28-2, 31 & 33! These bushings come prepared in a 2 pc. set, machined from Delrin - Size: 3"OD x 2.354"ID x 4"L

Pearson 36/38K Rudder Complete.

Details 

Pearson 36 Deep Keel Rudder, Complete. Please allow up to 6 weeks for delivery.

Pearson 36/38S Rudder Complete.

Details 

This Rudder is for Shoal Draft Pearson 36-2 built in the 80's. Please allow up to 4-6 weeks for delivery!

Pearson Main Sliding Hatch Curved Smoked Plexi.

This Main Hatch is Oven Formed 1/2" Marine Plexi #2412 Bronze This Hatch is used on many Pearson Built in the 1980's This is Special Order Item--Please Allow 2-3 Weeks

Pintle Lower O'272/O'240.

Details 

Used on O'day 240 & 272 Pintle is Stainless Steel 2"wide with 1/2" pin. Please check the hole pattern because some are opposite pattern

Pintle Upper O'272 & O'240.

Details 

Used on O'day 240 & 272 Pintle is Stainless Steel 2" Wide with 1/2" pin. Please check hole pattern because some are opposite.

Ronstan Cam Cleat (md).

Details 

These are Carbon-Fiber Cam-Cleats, sold individually. Known for high strength ability and superior hold! Fastener hole centres: 1 1/2" Rope Diameter: 1/8"-1/2"

Ronstan Front-Mount Fairlead (md).

Details 

Fits with Ronstan Cam Cleat RF5010 (DR5010)!

Ronstan RF616 Screw Pin D Shackle 3/16".

Details 

Stainless Steel Ronstan Standard Dee Screw Pin Shackle -Coined Pin Head ~ 3/16" ~ Part# RF616 Working Load Limit 880 lbs. Width between eyes 7/16"

Ronstan, Fairlead w/ SS Insert.

Details 

Ronstan Dead Eye! Includes Stainless Steel Insert, 9/16 Hole Clearance!

Rope Clutch,Garhauer 1 Single.

Details 

This piece is 3" in height and is mainly used with 5/16"-9/16" line. Safe working load = 1000 lbs

Rope Clutch,Garhauer 2 Double.

Details 

This piece is 3" in height and is mainly used with 5/16"-9/16" line. Safe working load = 1000 lbs

Rope Clutch,Garhauer 3 Triple.

Details 

This piece is 3" in height and is mainly used with 5/16"-9/16" line. Safe working load = 1000 lbs

Rope Clutch,Garhauer 4 Quad.

Details 

This piece is 3" in height and is mainly used with 5/16"-9/16" line. Safe working load = 1000 lbs

Rudder Pintle (Upper) with Safety Pin.

Details 

Pintle & pin are stainless steel. For 1-1/4" Rudders with 3/8"dia pin.Used on O'day Widgeon,Javelin & Daysailer1&2

Rudder Pintle 1-1/2"(Lower).

Details 

Heavy Duty Rudder Pintle Stainless Steel 1-1/2” Wide with 3/8" pin

Rudder Pintle 1-1/4 Lower.

Details 

Rudder Pintle Lower Stainlesss Steel 1-1/4" Wide with 3/8"Pin

Safety Pin for Rudder.

Details 

Made of Stainless Steel.

Sail Slide w/ Shcakle - 3/4".

Details 

Sail Stop 3/4" Flat.

Sail Track Stop 1/2' Round.

Details 

Size: 1/2" x .875"

Sidestay Chainplate (EA).

Details 

These are 5/16” Boats that were built before 1981 Especially the O’day 22 needs to changed to these chainplates. Originally they were 1/4” (NO Good)

Single Bullet Block.

Details 

Sheave Dia. 7/8" Max. 5/16"Line

Single Front/Side Shackle Block w/ Becket.

Details 

Stainless Steel Construction with Delrin 1 1/16" Sheave

Single Swivel Block 1-1/16"Sheave.

Details 

Stainless Steel Construction with Delrin 1 1/16" Sheave. Max.Line: 5/16"

Single Swivel Block w/ Becket.

Details 

Stainless Steel Construction with Delrin 1 1/16" Sheave Max.Line: 5/16"

Skene Bow Chocks 9" OL (PR).

Details 

Sold by the set, these 316 SS beauties are becoming popular. Max Rope: 1 1/4", Mounting Holes fit: 5/16" MS, Width: 1.72", 7.12" on Center Mounting Holes OL is 9 inch

Spreader Boots, Medium (Pr).

Details 

HURRY! OUR RUBBER SPREADER BOOTS ARE FINALLY BACK! Fits quickly and easily over the stay and spreader end. Sold by the pair! Fits 1" - 2" round spreaders! Color: White

Spreader Boots, Small (PR).

Details 

HURRY! OUR RUBBER SPREADER BOOTS ARE FINALLY BACK! Fits quickly and easily over the stay and spreader end. Sold by the pair! Fits 1/2" - 1" round spreaders! Color: White

Spreader Bracket.

Details 

This bracket is cast aluminum, for 1/2" Spreader

Spreader Bracket - Stainless Steel.

Details 

Uses 3 SS rivets or SS self-tapping screws for mounting..

Stanchion Base Heavy Duty 316 Cast Stainless Steel.

Details 

Stanchion Base Only.

Details 

Used on O'days

Stanchion Gate Brace Only.

Details 

Stainless steel - This does not include stanchion tube!

Stanchion Tube Only Dbl.LL 25-1/4".

Details 

25 1/4" tall used on O'day double lifelines. Stainless Steel Highly Polished.

Stanchion Tube Only Single LL 25-1/4.

Stern Light.

Details 

Used on O'day stern rails

Stern Side Rails (Pr).

Details 

Used on O'19, O'192 & O'222

Tabernacle - Stainless Steel.

Details 

Repalcement Tabernacle for O'day Mariner, O'day 20, and O'day 22 - Old-Style, please call if you have any questions

Tabernacle Hinge Large.

Details 

Heavy Duty Hinge Stainless Steel Top Plate is 4"x 6-1/2" Bottom Plate Mounts to Deck with Four 5/16" Bolts

Tabernacle Hinge Small.

Details 

Top Plate is 4"x 2-5/8" Bottom Plate Bolts to Deck and Measures 4" x 3-7/8"

Tabernacle Pin.

Details 

Tabernacle Pin Lg.3/8" x 4-1/8".

Details 

Fits Large Tabernacles

Tabernacle Pin Sm.1/4" x 3-1/2”.

Details 

Fits Small Tabernacles

Tank Vent 100 Degree-5/8"Hose.

Details 

Built-in Baffle Prevents Contamination Black Nylon (S.T.801)

Teak Bungs/Plugs 25 per Pkg..

Details 

Teak Handrail Moulding Only 8 Ft..

Details 

This sleek teak comes 8' length, 1-3/32" wide and 7/8" thick! Used on O'day sailboats.

Teak Handrail, 1-Loop (Ea).

Details 

16 1/4" overall length, 13" on center and 15 degree angle. Primarily used on Pearsons does not include any drilled holes!

Teak Handrail, 2-Loop (Ea.).

Details 

29 1/4" overall length, 13" on center and 15 degree angle. Primarily used on Pearson 26, does not include any drilled holes!

Teak Handrail, 3 Loop (Ea).

Details 

42" overall length, 13" on center & 15 degree angle. Primarily used on Pearson boats, does not include any drilled holes!

Teak Handrail, 4-Loop (Ea.).

Details 

55" overall length, 13" on center & 15 degree angle. Primarily used on Pearson boats, does not include any drilled holes!

Teak Handrail, 5-Loop (Ea.).

Details 

67 1/2" overall length, 13" on center and 15 degree angle. Primarily used on Pearson boats, does not include any drilled holes!

Teak Handrail, 6-Loop (Ea.).

Details 

63" overall length, 10" on center and 0 degree angle. Primarily used on O'day boats, does not include any drilled holes!

Teak Handrail, 9-Loop (Ea.).

Details 

93" overall length, 10" on center and 0 degree angle. Primarily used on O'day boats, does not include any drilled holes!

Teak Hatch Runner 6 Ft.(PR).

Details 

Part #DR15-14-PR. Please use this # when ordering 2 teak hatch runners. Also you may want to order 3/8” Teak Bungs/Plugs DR15-38

Teak Hatch Runner 6FT. (Ea).

Details 

6 foot long, 1 1/4" wide and 1 1/8" thick! Used on O'day Sailboats. For companion way main sliding hatch (top of cabin). 2 needed per boat However if ordering 2 please order under part#DR15-14-PR

Teak Toe Rail Large 8'.

Details 

This sleek teak comes 8' length, 1" wide and 1/2" thick. Used on O'day sailboats. (Please Note Due to Length of item and # of pcs--Freight Charges may vary.)

Teak Toe Rail Small 7'.

Details 

This sleek teak comes 7' length 3/4" wide and 1/2" thick. Used on O'day Sailboats.

Tiller Laminated 47" x 2" x 1-1/2".

Details 

This beauty icludes an epoxy finish with laminated mahogany & ash ... Length: 47", Severe Curve: 5", Height: 2", Width: 1-1/2" - This tiller is primarily used for O'day 23, 25, 26 & 27!

Tiller Laminated 47"L x 2"H x 1-1/2"W.

Details 

This tiller comes varnished!

Tiller Laminated 54" x 2 1/2" x 2 1/8".

Details 

This beauty icludes an epoxy finish with laminated mahogany & ash ... Length: 54", Curve: 5", Height: 2 1/2", Width: 2 1/8" - This tiller is primarily used for the Pearson 30!

Tiller Solid Ash 43" Complete W/ Stainless Straps O'20/22/23/25/R-19/MAR..

Details 

Stainlees Steel Straps 1-1/4"x9"x1/4 - ** PLEASE SPECIFY WHICH BOAT SO THAT WE MAY INSTALL STRAPS CORRECTLY**

Tiller, Solid Ash 1 1/2" x 1 1/4" x 43".

Details 

Poly-finish, clear solid ash ... used on many O'days O’day 19,192,20,22,23,25,26 O’day Mariner & Rhodes 19

Traveler Block For Mainsheet.

Details 

7/8" Sheave for use with 5/16" line.

Widgeon Outhaul Cap.

Details 

Great for Widgeons and Sprites

Widgeon Rudder & Tiller Complete.

Details 

Widgeon Rudder Blade Only, Aluminum.

Details 

Widgeon Rudder Head Complete w/ Pintles.

Details 

Widgeon Rudder Head Only--No Hardware.

Details 

Widgeon Sliding Gooseneck.

Details 

Widgeon Spreader Bar For Sidestay 1/2" x 13".

Details 

These spreader are heavy duty

Widgeon Tiller Only Solid Ash w/ Poly.

Details 

41" length

Widgeon Tiller w/ Cap.

Details 

This tiller is solid ash with a beautiful poly finish. Comes equiped with stainless steel tiller cap attached.

Windex 10 Sport.

Details 

Designed for small sailboats. Features 10" vane and adjustable tacking arm. Incudes glass-reinforced polycarbonate J-base for side,top,or front of mast mounting. - Stands 9.25" Tall

Windex 15.

Details 

NOW with Bird-Proof Spike

Window Sealant, Dow Corning.

Details